Colors for Doors & Mid-America Shutters –
Duron Paints –Exterior Semi-gloss
Black 02 MA
Tuxedo Grey 018 MA
Forest Green 028 MA
Classic Blue 036 MA
Bordeaux (Red) 167 MA
Trim Colors –Duron Paints – Exterior Semi-gloss
Solo White CW051W
Versatile Grey SW6072
Siding – Alside Williamsport
Colonial Ivory Pebble
Monterey Sand Cape Cod Grey
Wall Lanterns/Lamps
- Polished Brass Finish
Home Depot/Hampton Bay #560 293
Dimensions: 7”W x 23-3/4”H x 6-3/4” ext.
The tail is to be used in assembly.
Roofing
Shingles – laminated asphalt
TAMKO Building Products
Heritage Series 30
Rustic Black
Shutters
and Roofing Shingles can be purchased at Roof
Center, 1804 West St.
Have you had trouble locating air filters for your
furnace? You can order them on- line at
www.filtermarket.com
Have you had trouble locating door sweeps? You can
order them on-line at
http://hardware.
hardwarestore.com/73-456-doorbottom/door-bottom-455857.aspx
Waters Edge Copper Roof Painting (Summary of Mfg Data)
TDS 2003
TECHNICAL DATA SHEET
Products: Modern Masters Metallic Paint Collection™ (ME 195 Copper)
SURFACE PREPARATION:
All surfaces to be painted must be entirely free of dust, dirt, oil, grease, and other contaminants. Properly prime the clean, dry surface with a high-quality 100% acrylic primer (we highly recommend using Zinsser’s Bullseye 1-2-3® primer/sealer), and allow the surface to dry completely—preferably overnight.
APPLICATION:
Semi-opaque colors have good hide—three coats are recommended for best results.
TDS 2004
TECHNICAL DATA SHEET
Products: MasterClear Acrylic/Polyurethane Interior/Exterior
Topcoats
MasterClear Semigloss Code: ME662
Protective Clear Coating: In certain applications, such as some exterior areas, Metallic Paint Collection paints may require the use of a protective clear topcoat. A top-quality water-based, polyurethane/acrylic clear topcoat, such as Modern Masters MasterClear Semigloss improves washability, scuff resistance, abrasion resistance, and reduces the ‘rub-off’ of the Metallic Paint Collection paints.
Important Note: Other clear topcoats especially ‘100% acrylic’ topcoats may dull and
otherwise ruin the appearance of many Metallic Paint Collection paints. If you persist in
using a different clear topcoat besides MasterClear, be sure to test a small area to ensure that
the desired appearance does not become dull or otherwise change.
SURFACE PREPARATION:
Before applying MasterClear Clear Topcoats, the previously coated surface must be
completely clean, dry, and fully cured.
APPLICATION:
For best protection, apply a minimum of three coats for exterior applications.
Allow two hours between coats.
Once this process is completed, only an application of the clearcoat is needed to keep the fresh appearance. If the clearcoat wears off, the paint will fade and the entire process will need to be repeated.
The full detailed process is on the manufacturer’s website, www.modernmastersinc.com..
Paint Suppliers for Modern Masters (ME 195 Copper) Paint
Maryland Paint & Decorating
2012 Industrial Dr
Annapolis, MD 21401
410-266-0057
Clement Hardware Inc
500 Ritchie Hwy
Severna Park, MD 21146
410-647-4611